User`s guide

150
SX-AP-4800AN User's Guide
Log Output - USB
USB Log Output
General Conguration
-
Detail Conguration
*
Details Enable/Disable the USB log output.
When set to ENABLE, the USB storage device cannot be used over a network using the Device Server
feature of SX-AP-4800AN.
Range ENABLE/DISABLE
Default Value DISABLE
File Size
General Conguration
-
Detail Conguration
*
Details Specify the log le size (Mbyte).
Range 1-100
Default Value 10
Generation Number
General Conguration
-
Detail Conguration
*
Details Specify the generation number to save the log.
Range 1-10
Default Value 2
File Name
General Conguration
-
Detail Conguration
*
Details Specify the log le name.
Range Alphanumeric character string (1-64 characters)
Default Value log
Based on the specied le size and generation number, SX-AP-4800AN regularly creates new log
les and rotates them by renaming the older version of les.
Example:
File Size: 10MByte
Generation Number: 3
File Name: log
In case of above setting, the log is created up to 3 les ("log.0", "log.1", "log.2") according the
rotation procedure below.
(New) log.0 -> log.1 -> log.2 (Old)
1) When the size of log.0 reaches 10MByte, the log.2 is deleted.
2) The log.1 is renamed as log.2.
3) The log.0 is renamed as log.1 and then saved.
4) A new le log.0 is created and then saved.
TIP