User`s guide

3. Setup
35
Wireless LAN - General Conguration
- Please be sure to use encryption when you connect SX-AP-4800AN to the wireless network.
- Wireless bands for IEEE 802.11b/g or IEEE 802.11b/g/n are often in use by other people
because the number of devices supporting these standards is growing rapidly. If these wireless
modes are used, you may run into issues with having enough communication bandwidth.
- When using SX-AP-4800AN outdoors, you must observe the radio regulations of each
country. In some countries, the use of particular wireless bands (channels) outdoors is
strictly prohibited.
-
When using W53 (52/56/60/64ch) or W56 (100/104/108/112/116/120/124/128/132/136/140ch)
channels, please be careful of the restrictions addressed at 2. About SX-AP-4800AN - 2-6.
Wireless Interference Information - DFS.
1.
From the left menu on the Web page, click Detail Conguration - Wireless LAN.
2.
In the General Conguration page, congure each setting.
Basic wireless settings can be congured.
- For details on each conguration item, refer to A. Appendix - A-1. List of All Settings.
- You can switch between 4 tabs on the Wireless LAN Conguration page.
It is not necessary to click Submit each time you have switched the tab.
- The WDS Conguration tab provides WDS conguration.
- The Security Conguration tab provides the security conguration for a wireless LAN.
- The Extension Conguration tab provides extended functions for a wireless LAN.
- The Smart Wireless Setup tab provides easy wireless conguration.
Note
TIP