User`s guide

4. Connecting Your Wireless Device
47
4-2. Connecting Your Wireless Device
Making a Connection Using Smart Wireless Setup Switch
How to connect your wireless device to SX-AP-4800AN by changing the wireless settings of
your device using easy wireless setup feature:
Following methods are available to connect your wireless devices.
- Making a connection using the Smart Wireless Setup switch on SX-AP-4800AN
- Making a connection using the Web page of SX-AP-4800AN
- Making a connection using the PIN code
1.
Check that your wireless device supports WPS and is powered on.
2.
Press and hold the wireless setup switch (SET2). Release it when Mode LED start
blinking in Green.
How to connect your devices using Smart Wireless Setup switch on SX-AP-4800AN:
- To continue, Smart Wireless Setup needs to be set to ENABLE. Before you begin, please
check the setting at the Smart Wireless Setup page on the Web page.
- During this conguration, please place your wireless device closer to SX-AP-4800AN so that
they can communicate better.
- When the Stealth Mode is enabled on SX-AP-4800AN, wireless connection method using
Smart Wireless Setup cannot be used.
TIP
TIP