User`s guide

48
SX-AP-4800AN User's Guide
1.
Check that your wireless device supports WPS and is powered on.
2.
Login to the Web page of SX-AP-4800AN using your Web browser.
How to connect your devices using the Web page of SX-AP-4800AN:
- To continue, Smart Wireless Setup needs to be set to ENABLE. Before you begin, please
check the setting at the Smart Wireless Setup page on the Web page.
- During this conguration, please place your wireless device closer to SX-AP-4800AN so that
they can communicate better.
3.
Press the wireless setup switch also on your wireless device.
- The name, position and shape of the wireless setup switch(WPS button) will differ
depending on your wireless device. For details, refer to the operation manual that came with
your wireless device.
- Please use only one wireless device. Even if two or more devices are waiting for wireless
connections, SX-AP-4800AN can congure only one device which has replied rst.
4.
SX-AP-4800AN will start to communicate with your wireless device and congure the
same wireless settings. The Mode LED will turn to Green when the configuration is
completed.
- If Mode LED turns to Red, the configuration would have failed. Read the notes on this
conguration and try again.
- Mode LED (Green/Red) will turn o in 3 mins.
Note
TIP
TIP