Manualshelf

User`s guide

ManualsBrandsSilex technology ManualsComputer equipmentSX-AP-4800AN
51525354555657585960
50
SX-AP-4800AN User's Guide
Making a Connection Using a PIN Code
1.
Check that your wireless device supports WPS and is powered on.
2.
Login to the Web page of SX-AP-4800AN using your Web browser.
- To continue, Smart Wireless Setup needs to be set to ENABLE. Before you begin, please
check the setting at the Smart Wireless Setup page on the Web page.
- During this conguration, please place your wireless device closer to SX-AP-4800AN so that
they can communicate better.
3.
From the left menu on the Web page, click Smart Wireless Setup - Smart Wireless
Setup.
4.
Enter the PIN code congured to your wireless device to PIN Code and click Register.
5.
SX-AP-4800AN will start to communicate with your wireless device and congure the
same wireless settings. The Mode LED will turn to Green when the configuration is
completed.
- If Mode LED turns to Red, the configuration would have failed. Read the notes on this
conguration and try again.
- Mode LED (Green/Red) will turn o in 3 mins.
Note
TIP