User`s guide

5. Other Features
57
1.
Select the USB device in SX Virtual Link's main window and connect to it.
2.
When successfully connected to the USB device, Windows Plug and Play will run and
the USB device will become ready to use.
How to connect/disconnect to/from USB devices:
3.
When nished using the USB device, disconnect it using SX Virtual Link.
- For details on how to use SX Virtual Link, refer to the Online Help.
Note
- If a USB device is shared among several users, make sure that each user disconnects from
the USB device after they have nished using it. Otherwise, other users will not be able to
connect to the USB device.
TIP
How to connect:
How to disconnect:
Double-click Double-click the USB device in SX Virtual Link's main window.
Use a button Select the USB device and click the Connect button in SX Virtual Link's
main window.
If you select two or more USB devices, you can connect to them at once.
Right-click Right-click on the USB device in SX Virtual Link's main window and click
Connect in the menu displayed.
If you select two or more USB devices, you can connect to them at once.
Use a keyboard Select the USB device using the up/down arrow keys and press Alt+C on
your keyboard.
Double-click Double-click the USB device in SX Virtual Link's main window.
Use a button
Select the USB device and click the Disconnect button
in SX Virtual
Link's main window.
Right-click Right-click on the USB device in SX Virtual Link's main window and click
Disconnect in the menu displayed.
Use a keyboard Select the USB device using the up/down arrow keys and press Alt+D on
your keyboard.