User`s guide
5. Other Features
63
- For how to restart SX-AP-4800AN, refer to Chapter 5-7 Maintenance Feature - Restarting.
- If you continue to configure the other settings, you do not have to restart. Please restart when you
completed all other settings.
- The log output will not be started unless SX-AP-4800AN is restarted.
- If the log output feature is enabled, the USB storage device connected to SX-AP-4800AN are not displayed
in SX Virtual Link.
Note
3.
In the Log Output page, specify where to output the log and le names and then click
Submit.
4.
When nished, restart SX-AP-4800AN.
- To save the log to USB storage device, select ENABLE for USB Log Output and congure the settings such
as a le name, etc.
- To send the log to Syslog server, select ENABLE for Syslog Server Log Output and set the address of
Syslog server.
- The log can be saved to USB storage device and sent to Syslog server at the same time. The same log
information will be output for both side.
- For details on each conguration item, refer to A. Appendix - A-1. List of All Settings.
Note