User`s guide

68
SX-AP-4800AN User's Guide
Notice When Using the Log Output
Please DO NOT remove the USB storage device while the USB log output is
enabled.
When you remove the USB storage device, be sure to disable the USB log output
feature beforehand. For how to disable the USB log output, refer to Retrieving
the Log saved into USB storage device - How to disable the USB log output.
If the USB storage device is removed without turning off the USB log output
feature, the POWER LED on SX-AP-4800AN will blink in Red.
- For how to restart SX-AP-4800AN, refer to Chapter 5-7 Maintenance Feature -
Restarting.
- The log output will not be started unless SX-AP-4800AN is restarted.
Note
1.
Connect the removed USB storage device to the PC to verify that it has not
be damaged or corrupted.
2.
Remove the USB storage device from the PC and reconnect it to SX-AP-4800AN.
- Please format the USB storage device if the data is corrupted.
Note
If the POWER LED blinks in Red, follow the instructions below to recover from it:
3.
Restart SX-AP-4800AN.