User`s guide
90
SX-AP-4800AN User's Guide
3.
Enter the necessary settings at DHCP Server Conguration.
If ENABLE is selected at DHCP Server Function, the following settings will become
available.
- Start IP Address
- End IP Address
- Subnet Mask
- Default Gateway
- Lease Time
4.
After entering the settings, click Submit on the bottom right of Web page.
5.
When nished, restart SX-AP-4800AN.
- For how to restart SX-AP-4800AN, refer to Chapter 5-7 Maintenance Feature - Restarting.
Note