Introduction SX-WSG1 Users Manual Thank you for purchasing the Wireless Adapter SX-WSG1. This manual provides information on how to configure and use SX-WSG1. Please read the Safety Instructions in this chapter before using SX-WSG1. Introduction ● ● ● About the notation About this manual About trademarks Introduction file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/00_0_intro_e.
Introduction About the notation This manual uses the following symbols to indicate specific information for operating SX-WSG1. Be sure to carefully review before using SX-WSG1. : This symbol indicates important information that needs to be observed when operating SX-WSG1. Make sure to read this information for safe and proper use. : This symbol indicates information that is useful when using SX-WSG1. If you experience difficulties operating SX-WSG1, please refer to this information first.
About SX-WSG1 About SX-WSG1 This page provides the SX-WSG1 overview and operating environments. 1.Features 2.Parts on SX-WSG1 ● Parts and function 3.Notes on the radio wave 1.Features SX-WSG1 is a Wireless Adapter which supports IEEE802.
About SX-WSG1 For details on how to print from digital camera to Digital Photo Printer wirelessly, please visit the website below. SONY's website: http://www.sony.net/snaplab ● Share various USB devices using a PC (Device Server function) By using SX-WSG1 and the bundled utility, SX Virtual Link, you can share USB devices such as printers, scanners, storage devices among several PCs over the network (See the supported OS below). You can use USB devices as if they were locally connected to your PC.
About SX-WSG1 The device server function has the following features: ❍ ❍ ● Printer auto connection SX Virtual Link has a feature that detects print jobs and then automatically connects to, prints to and disconnects from the printer (or USB device with a print capability) if it is connected to SX-WSG1. You will not have to manually connect to the printer using the SX Virtual Link before you print a job.
About SX-WSG1 ● ● ● ● ● ● ● Camera Direct Transfer mode and Device Server mode cannot be used at a time. silex technology shall not be liable for any loss or damage of data in data storage devices resulting from the use of SX-WSG1. silex technology shall not also be liable for any leak, manipulation, loss, or corruption of data in data storage devices connected to SX-WSG1 as a result of improper use. Isochronous devices such as Web camera and USB speaker, etc. are not available.
About SX-WSG1 2 Status LED (Orange) Blinks during data transfer. 3 Link LED (Green) ON A network connection is established through a wired LAN. Blink Searching for a network connection (Blinks when a network cable is disconnected) < For a wireless connection > ON A network connection is established through a wireless LAN (Infrastructure mode).
About SX-WSG1 ● ● ● Microwave, scientific instruments, pacemaker or other medical equipment. Licensed radio station in a factory. Small power radio station (a non-licensed radio station). Do not use SX-WSG1 near a cellular phone, TV or Radio. A cellular phone, TV, and radio use a different radio band than our products. Generally if they are used near SX-WSG1, it will not cause a problem. However, when they approximate SXWSG1, sound or image noise can happen.
Enable Camera Direct Transfer Feature Enable Camera Direct Transfer Feature This page explains how to enable Camera Direct Transfer feature. 1. Check SX-WSG1 settings 2. How to use 1. Check SX-WSG1 settings Check that the SX-WSG1 is running in the mode which allows communication with a digital camera (Camera Direct Transfer mode) by accessing SX-WSG1's Web browser configuration interface. The following is the method to access the Web browser configuration interface.
Enable Camera Direct Transfer Feature ● If you are not sure of the IP address, you can go back to the Wireless Adapter Search screen in Wireless Adapter Setup and find it there. For details, refer to Configure Through a Wired LAN (For Windows / For Macintosh). 2. Click Network Settings tab. The window below is displayed. Enter a user name (root) and password (by default, there is no password) and click OK. file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/04_1_ftp_http_mode_e.
Enable Camera Direct Transfer Feature 3. Check that Camera Direct Transfer is selected at Extended Function. If Device Server has been selected, select Camera Direct Transfer and click Submit button. SX-WSG1 will reboot and run in Camera Direct Transfer mode. file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/04_1_ftp_http_mode_e.
Enable Camera Direct Transfer Feature Camera Direct Transfer feature has been enabled. 2. How to use For details on how to print from digital camera to a Digital Photo Printer wirelessly, please visit the website below. SONY's website: http://www.sony.net/snaplab file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/04_1_ftp_http_mode_e.
Enable Camera Direct Transfer Feature Back to Top file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/04_1_ftp_http_mode_e.
Enable Device Server Feature Enable Device Server Feature This page explains how to enable the Device Server feature. To use the SX-WSG1 as a device server, you need to change the configuration is as follows. ● ● To use the Web browser configuration interface, the TCP/IP settings need to be enabled, and an IP address needs to be configured. We recommend the following Web browsers: Windows Mac OS ● ● Microsoft Internet Explorer 5.5 or higher Netscape Navigator 7.1 or higher Safari 1.0.
Enable Device Server Feature ● If you are not sure of the IP address, you can go back to Wireless Adapter Search screen in Wireless Adapter Setup and find it there. For details, refer to Configure Through a Wired LAN (For Windows / For Macintosh). 2. Click Network Settings tab. The window below is displayed. Enter a user name (root) and password (by default, there is no password) and click OK. file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/04_2_ds_mode_e.
Enable Device Server Feature 3. Select Device Server at Extended Function. file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/04_2_ds_mode_e.
Enable Device Server Feature 4. Click Submit button. file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/04_2_ds_mode_e.
Enable Device Server Feature Device Server feature has been enabled. SX-WSG1 will reboot and run as a device server. To use the device server feature, you need to install the USB device connection utility, SX Virtual Link. For details on how to install SX Virtual Link, refer to Install Application (For Windows / For Macintosh). If SX Virtual Link has already been installed on your PC, refer to SX Virtual Link Overview (For Windows / For Macintosh) for details on how to use it.
Display Digital Photo Printer Status Display Digital Photo Printer Status This page explains how to display the printer status for a Digital Photo Printer on SX-WSG1's Web page. ● ● To use the Web browser configuration interface, the TCP/IP settings need to be enabled, and an IP address needs to be configured. We recommend the following Web browsers: Windows Mac OS ● ● Microsoft Internet Explorer 5.5 or higher Netscape Navigator 7.1 or higher Safari 1.0.
Display Digital Photo Printer Status ● If you are not sure of the IP address, you can go back to the Wireless Adapter Search screen in Wireless Adapter Setup and find it there. For details, refer to Configure Through a Wired LAN (For Windows / For Macintosh). 2. Click Printer Status. file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/08_1_dfp_status_e.
Display Digital Photo Printer Status The printer status for the Digital Photo Printer being connected to SX-WSG1 is displayed. 2. About Digital Photo Printer status Available printer status file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/08_1_dfp_status_e.
Display Digital Photo Printer Status The printer status available on the Web page is as follows. Name Status USB Serial No. Display serial number of printer. Paper Type Display paper type of printer. Remaining prints Display ribbon level of printer. Total prints Display the total number of prints. Total prints(Thermal head) Display the total number of prints (Thermal head). Printer status Display printer operating status. The following messages are displayed for each status.
Display Digital Photo Printer Status Max number of printers that can be connected The max number of printers that can be connected differs depending on the extended function setting. Extended Function Max number of printers that can be connected Camera Direct Transfer Only one printer can be connected. Device Server Two or more devices can be connected. (Printer status is available for each device.) 3.
Specifications Specifications 1.Hardware specifications 2.Software specifications 3.Configuration settings ● ● ● ● Network Settings Security Wireless Password 1.
Specifications Wireless network interface Channel US : 1-11ch EU : 1-13ch JP : 1-14ch Frequency 2.4GHz Transmission OFDM system IEEE802.11g Transmission 6M/12M/18M/36M/48M/54M speed (Automatic detection) Channel Device interface US : 1-11ch EU : 1-13ch JP : 1-13ch USB2.
Specifications EN55022 Class-B EN55024 2.Software specifications TCP/IP Supported protocols FTP, HTTP, TELNET, DHCP, BOOTP, WINS, TCP, UDP, ARP, IP, ICMP, JCP (silex technology, Inc. proprietary protocol), SXUPTP (silex technology, Inc. proprietary protocol), Raw, LPD, IPP Windows 2000 Windows XP (32-Bit Edition / 64-Bit Edition) Supported OS Total number of available USB connections ● Windows Vista (32-Bit Edition / 64-Bit Edition) Mac OS X Ver 10.2.7∼Ver 10.5.x Mac OS X Ver 10.
Specifications ● USB Hub connection SX-WSG1 does not support a cascade connection. Do not connect two or more USB Hubs between SX-WSG1 and a USB device. 3.Configuration items The following items can be configured using a Web browser. Network Settings Item Description Factory default file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/99_spec_e.
Specifications Host Name Configure the host name for SX-WSG1. The host name is used for the SX Virtual Link, WINS, etc. Assign a unique name. DHCP/BOOTP Enable DHCP/BOOTP protocol operations. SX-WSG1 detects DHCP and BOOTP automatically. If more than 1 address gets returned, the IP address which is returned first will be assigned. SXxxxxxx (xxxxxx is the last 6 digits of the Ethernet address) ENABLE IP Address Configure the IP address on SX-WSG1 in decimal number, "XXX.XXX.XXX.XXX." 0.0.0.
Specifications Extended Function Configure the SX-WSG1 operating mode. Camera Direct Transfer mode and Device Server mode can be selected. If Camera Direct Transfer is enabled, a print data can be transferred directly from digital camera to Digital Photo Printer and then printed without PC. If Device Server is enabled, various USB devices can be shared among several PCs over the network. Camera Direct transfer Description Factory default Configure the IP filter operations.
Specifications SSID Channel Configure the SSID on SX-WSG1. Maximum 32 alphanumeric characters can be used for the configuration. SSID is an ID that logically distinguishes one wireless LAN network from another. Whenever SSID does not match, groups cannot communicate with each other even if those groups use the same channel in the same communication area. GROUP Configure the communication channel that is used for Ad hoc mode.
Specifications WEP Key1 - 4 Configure the WEP Key on SX-WSG1. Enter 10 digits (40 bit) when the key size is 64 bit. Enter 26 hexadecimal digits (104 bit) when the key size is 128 bit. If the Key Format is alphanumeric Character, enter 50digit or 13 digit alphanumeric character. Encryption Mode Select the encryption mode used for data transmission through WPA/WPA2 from TKIP, AES or AUTO. If you use WPA2, select AES or AUTO. Pre-Shared Key Enter the Pre-Shared Key.
SX-WSG1 Manual SX-WSG1 Manual Introduction ● ● ● ● ● Introduction Safety Instructions About SX-WSG1 User Registration/Services About OpenSSL License Configure SX-WSG1 Camera Direct Transfer Device Server Printer Status Other Functions Troubleshooting Specification file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/contents1.
SX-WSG1 Manual SX-WSG1 Manual Introduction Configure SX-WSG1 ● Before Setup Configure SX-WSG1 (for Windows) ● ● ● ● Configure Through a Wired LAN Configure Using a USB Memory Configure Through a Wireless LAN Configure Using Windows Connect Now Configure SX-WSG1 (for Macintosh) ● ● ● Configure Through a Wired LAN Configure Using a USB Memory Configure Through a Wireless LAN Camera Direct Transfer Device Server Printer Status Other Functions Troubleshooting Specification file:///C|/Documents%20and%20S
SX-WSG1 Manual SX-WSG1 Manual Introduction Configure SX-WSG1 Camera Direct Transfer ● Enable Camera Direct Transfer Feature Device Server Printer Status Other Functions Troubleshooting Specification file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/contents3.
SX-WSG1 Manual SX-WSG1 Manual Introduction Configure SX-WSG1 Camera Direct Transfer Device Server ● Enable Device Server Feature Install Application ● ● For Windows For Macintosh How to Use SX Virtual Link (for Windows) ● ● ● ● ● ● ● SX Virtual Link Overview SX Virtual Link Screen Descriptions Basic Usage Add to Favorites List Favorite Device Configuration Compact Mode SX Virtual Link Environment Settings How to Use SX Virtual Link (for Macintosh) ● ● ● ● ● ● SX Virtual Link Overview SX Virtual Link
SX-WSG1 Manual Other Functions Troubleshooting Specification file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/contents4.
SX-WSG1 Manual SX-WSG1 Manual Introduction Configure SX-WSG1 Camera Direct Transfer Device Server Printer Status Other Functions Troubleshooting ● Q&A Specification file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/contents5.
SX-WSG1 Manual SX-WSG1 Manual Introduction Configure SX-WSG1 Camera Direct Transfer Device Server Printer Status Other Functions ● ● ● ● ● Print with Standard Windows Printing Advanced Settings Using Web Browser Network Plug and Play IP Filter Reset to Factory Default Troubleshooting Specification file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/contents6.
SX-WSG1 Manual SX-WSG1 Manual Introduction Configure SX-WSG1 Camera Direct Transfer Device Server Printer Status Other Functions Troubleshooting Specification ● Specifications file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/contents7.
SX-WSG1 Manual SX-WSG1 Manual Introduction Configure SX-WSG1 Camera Direct Transfer Device Server Printer Status ● Display Digital Photo Printer Status Other Functions Troubleshooting Specification file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/contents8.
SX-WSG1 Users Manual SX-WSG1 Manual SX-WSG1 Users Manual Introduction ● ● ● ● ● Introduction Safety Instructions About SX-WSG1 User Registration/Services About OpenSSL License Configure SX-WSG1 Camera Direct Transfer Device Server Printer Status Other Functions Troubleshooting Specification Thank you for purchasing the Wireless Adapter SXWSG1. This manual provides information on how to configure and use SX-WSG1. Please read the Safety Instructions in this chapter before using SX-WSG1.
SX-WSG1 Users Manual Introduction About the notation This manual uses the following symbols to indicate specific information for operating SX-WSG1. Be sure to carefully review before using SX-WSG1. This symbol indicates important information that needs to be observed when operating : SX-WSG1. Make sure to read this information for safe and proper use. This symbol indicates information that is useful when using SX-WSG1.
SX-WSG1 Users Manual ■ ■ the United States and/or other countries. AirMac, AirPort, Macintosh, MacOS and Safari are registered trademarks of Apple, Inc. Other brand or product names are trademarks or registered trademarks of their respective owners. Back to Top file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/SXWSG1.
