Specifications

Specifications
Extended
Function
Configure the SX-WSG1 operating mode. Camera
Direct Transfer mode and Device Server mode can be
selected.
If Camera Direct Transfer is enabled, a print data can
be transferred directly from digital camera to Digital
Photo Printer and then printed without PC. If Device
Server is enabled, various USB devices can be shared
among several PCs over the network.
Camera Direct
transfer
Security
Item Description Factory default
IP Filter Mode Configure the IP filter operations. Available options are
"ALLOW" and "DENY." If you select "ALLOW," only the
data from the configured IP address range are
accepted. If you select "DENY," the data from the
configured IP address range cannot be received.
DENY
Filter #0-3 Configure the IP filter range. IP addresses to be filtered
can be configured to maximum 4 address ranges. If
address range configuration is not required, please
enter the address range from "0.0.0.0" to "0.0.0.0".
0.0.0.0
Wireless
Item Description Factory default
Wireless Mode Configure the wireless mode on SX-WSG1. Select
either AdHoc or Infra..
If you do not use an access point:
AdHoc also called 802.11 Ad hoc, needs SSID
configuration. A network with enhanced security can
be established because the access is allowed only
within the group sharing the SSID.
If you use an access point:
Select Infrastructure mode. This mode connects
and communicates
through the access point which has the same SSID
as SX-WSG1.
AdHoc
file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/99_spec_e.htm (6 of 8) [12/15/2008 10:05:35 AM]