Specifications

Specifications
SSID Configure the SSID on SX-WSG1. Maximum 32
alphanumeric characters can be used for the
configuration.
SSID is an ID that logically distinguishes one
wireless LAN network
from another.
Whenever SSID does not match, groups cannot
communicate with each other even if those groups
use the same channel in the same communication
area.
GROUP
Channel Configure the communication channel that is used
for Ad hoc mode.
The devices should use the same channel if they
need to communicate with each other.
If the same SSID already exists, the channel setting
originally configured through it is invalidated.
11
Network
Authentication
Select the Network Authentication mode from Open,
Shared, WPA and WPA2.
Open (Open System):
Permit any access without any authorization.
Shared (Pre-Shared Key):
Grant the access to the device sharing a secret
WEP key that is
configured beforehand.
WPA ("Infrastructure" mode only):
Provide network authorization through PSK and
encrypted data transmission through TKIP/AES/
AUTO. Since the encryption key is created by
communicating with an access point, the WEP key
setting is invalidated.
WPA2 ("Infrastructure" mode only):
Provide network authorization through PSK and
encrypted data transmission through AES/AUTO.
Since the encryption key is created by
communicating with an access point, the WEP key
setting is invalidated.
Open
WEP Turn ON or turn OFF WEP on SX-WSG1.
OFF
Key Index Specify the default WEP key. 1
Key Size Specify the length of the WEP key. 64bit
Key Format Select the key format for WEP Key. Hexadecimal
file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/99_spec_e.htm (7 of 8) [12/15/2008 10:05:35 AM]