Specifications

About SX-WSG1
The device server function has the following features:
❍ Printer auto connection
SX Virtual Link has a feature that detects print jobs and then automatically
connects to, prints to and disconnects from the printer (or USB device with a print
capability) if it is connected to SX-WSG1. You will not have to manually connect to
the printer using the SX Virtual Link before you print a job.
❍ Supports Raw/LPR/IPP printing
SX-WSG1 supports Raw mode, LPR and IPP, three of the network printing
protocols commonly used by users. When a printer is connected to SX-WSG1, you
can also use standard Windows printing.
● Digital Photo Printer status
Since the operating status of the Digital Photo Printer is displayed on SX-WSG1's Web
page, you can always check the printer status as well as ink levels from your PC.
For details on the Digital Photo Printer, please visit the below website.
SONY's website:
http://www.sony.net/snaplab
● Support IEEE802.11b/g Wireless LAN standard
IEEE802.11b/g compliance allows sharing of various USB devices over the wireless
network.
In the wireless settings, WEP, WPA(PSK) and WPA2(PSK) can be selected. For
encryption mode, WEP supports 64/128 bit, WPA supports TKIP/AES/AUTO, and WPA2
supports AES/AUTO.
● Easy configuration utility
You can configure SX-WSG1 as well as install necessary utilities by answering questions
on the Wireless Adapter Setup, which is a wizard-style utility included in the CD-ROM
that came with SX-WSG1. Since SX-WSG1 has a wired LAN port (10BASE -T/100BASE-
TX), an easy wireless LAN configuration based on the wired connection will be available.
Also, SX-WSG1 supports the configuration method using a USB memory, which allows
you to configure even if you do not have a wired LAN environment.
file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/00_3_about_e.htm (3 of 6) [12/15/2008 10:05:30 AM]