Specifications
Enable Camera Direct Transfer Feature
Enable Camera Direct Transfer Feature
This page explains how to enable Camera Direct Transfer feature.
1. Check SX-WSG1 settings
2. How to use
1. Check SX-WSG1 settings
Check that the SX-WSG1 is running in the mode which allows communication with a digital
camera (Camera Direct Transfer mode) by accessing SX-WSG1's Web browser configuration
interface. The following is the method to access the Web browser configuration interface.
● To use the Web browser configuration interface, the TCP/IP settings need to be enabled, and
an IP address needs to be configured.
● We recommend the following Web browsers:
Windows
Microsoft Internet Explorer 5.5 or higher
Netscape Navigator 7.1 or higher
Mac OS Safari 1.0.3 or higher
● The following procedures are examples when Internet Explorer is used in Windows XP.
Actual screens or displays may vary depending on your Web browser.
1. Access the SX-WSG1's Web page.
Type the IP address of the SX-WSG1 in the address bar of the Web browser and press
the ENTER key.
Example) Type 192.168.20.123 and press the ENTER key.
file:///C|/Documents%20and%20Settings/evillegas.STA/Desktop/a/English/SXWSG1/04_1_ftp_http_mode_e.htm (1 of 5) [12/15/2008 10:05:31 AM]