User's Manual

Specifications/Compliance Silex Page 9
140-00197-100 Revision A
2. Connect one end of the antenna cable to the main antenna connector on the SX-SDCAG (see
figure 2). If you are using a diversity antenna configuration, connect one end of the second
antenna cable to the secondary antenna on the SX-SDCAG.
Figure 2. Connecting the Antenna(s) and cable(s) to the SX-SDCAG
3. Insert the SX-SDCAG into an available SDIO slot in your device. Make sure that it is securely
seated.
4. If your device is subject to significant vibration or other forces, Silex recommends securing the
SX-SDCAG using the corner mounting hole with a screw to prevent the accidental ejection of the
card.
Figure 3. Securing the SX-SDCAG
M2 Screw