User's Manual

eBridge Labeling
Integrator's Guide
Silver Spring Networks
2
1 Introduction
The Silver Spring Networks eBridge is a FCC Part 15.247 compliant device that enables
communication between Silver Spring Networks AMI network and intelligent endpoint device
(IED) connected to either the serial or Ethernet port of the eBridge. The eBridge transmits in
the 902 to 928 MHz, ISM band and transfers data from the IEDs to Silver Spring Networks Access
Points, Relays and/or other continuous power device acting as network relays.
2 eBridge Labeling
The SSN eBridge has two labels relevant to unit assembly – the FCC & Part Number label and
the SSN MAC Address label. Both labels are located on the top side of the eBridge PCBA. The
barcode format is Code 3 of 9.
Figure 1 is an example of the FCC ID label that can be found in the location indicated in