Installation Instructions

STEP 2 — Determine your tab
2.1 Silvercote’s most popular MBI roof
insulation has one - 6” handed tab or
two - 3” tabs. See the cutlist and labels
to determine which tabs were provided.
If you have one - 6” tab see 3.1
If you have two - 3” tabs see 3.4
To meet increasing energy codes Silvercote recommends sealing all insulation seams
by using our one - 6” tab with double sided tape pre-applied. However, Silvercote
offers many different tab and tape configurations. Shown here are two options for
installing your faced insulation.
FACTORY APPLIED DOUBLE
SIDED TAPE
3.1 If one - 6” tab is supplied, unroll with
the tab facing in the direction you
are roofing. Unroll the next roll
overlapping the facing onto the
tab of the previous roll.
3.2 If your rolls were ordered with double
sided tape applied to the tabs,
remove the paper backing now.
WITHOUT TAPE
3.3 If one - 6” tab is supplied, unroll with
the tab facing in the direction you
are roofing. Unroll the next roll
overlapping the facing onto the tab
of the previous roll.
One - 6” tab
Two - 3” tabs
3
STEP 3 — One 6” tab
3.2
Double sided tape applied to facing tab
Roofing direction
3.1
Roofing direction
3.3