36.6 18~35 dBA Back plate Square spacer Stand-off M3.
Fan screw A TD03-E Fan screw A TD02-E
INTEL Durable high performance all-in-one Liquid Cooler Make sure you are using the correct side of the back plate for your motherboard and insert the screw into the correct holes based on the CPU socket you use. *Insert the square spacer into the center hole on the back plate for LGA775. Sicherstellen, dass Sie die richtige Seite der Rückplatte für Ihr Motherboard verwenden; Schrauben entsprechend dem von Ihnen verwendeten CPU-Sockel in die richtigen Löcher stecken.
INTEL Durable high performance all-in-one Liquid Cooler Mount LGA2011 and INTEL clips and tighten the nuts Setzen Sie die LGA2011 und Intel Clips auf die Schrauben und verschrauben Sie diese mit den Schraubmuttern. Monter les plaque de fixation pour processeur LGA2011 et INTEL, et serrer les écrous. Monte los clips de LGA2011, INTEL y ajuste las tuercas. Installare i dispositivi di fissaggio LGA2011 ed INTEL e stringere i dadi. Установите интеловские зажимы и закрепите винты.
INTEL Durable high performance all-in-one Liquid Cooler Connect the waterblock and fan connectors onto the relevant motherboard connectors, installation complete. Wasserblock- und Lüfteranschlüssen mit den entsprechenden Motherboard-Anschlüssen verbinden; damit ist die Installation abgeschlossen. Connectez le réservoir d'eau et les connecteurs du ventilateur sur les connecteurs de la carte mère correspondants, pour terminer l'installation.
Fan screw A TD03-E Fan screw A TD02-E
AMD Durable high performance all-in-one Liquid Cooler Place the insulation pads on the appropriate position. Check the holes of motherboard before installation and insert the screws into the corresponding holes of back plate. Isolierungsauflagen an der entsprechenden Stelle anbringen. Löcher des Motherboards vor Installation prüfen, Schrauben in die entsprechenden Löcher an der Rückplatte einstecken. Placez les coussinets d'isolation dans la position appropriée.
AMD Durable high performance all-in-one Liquid Cooler Connect the waterblock and fan connectors onto the relevant motherboard connectors, installation complete. Wasserblock- und Lüfteranschlüssen mit den entsprechenden Motherboard-Anschlüssen verbinden; damit ist die Installation abgeschlossen. Connectez le réservoir d'eau et les connecteurs du ventilateur sur les connecteurs de la carte mère correspondants, pour terminer l'installation.
Warranty Information This product has a limited 5 year warranty in North America, Europe, and Australia. For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor. Warranty terms & conditions 1. Product component defects or damages resulted from defective production is covered under warranty. Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.
Additional info & contacts For North America (usasupport@silverstonetek.com) SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested. Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer.
NO.