Quick Start Guide

1. Attach Lid Support 4 into pre-drilled holes of Seat B and Divider C using Phillips
Screws Round Head 9 .
2. Use phillips screwdriver to tighten Screws. Do not over-tighten.
13/16
ASSEMBLY
STEP 6
NOTE: The screwdriver is not
included in the hardware pack.
1. Attach Seat B to 3 Hinges on Back F using Phillips Screws 7
( using guide holes underneath of Seat ).
2. Use phillips screwdriver to tighten Screws. Do not over-tighten.
STEP 7
7
B
4
9
B
C
MODEL # 3AXCADABEN-ALB