Instructions / Assembly

11
CAM SHELF INSTALLATION (FIXED SHELVES)
Cam shelves are installed with cam and bolt connectors which makes
them semi-permanent and creates a more rigid structure.
Some cam shelf locations are exactly determined… by drawers, for
example. Other cam shelves may be positioned according to personal
needs or preferences.
Recommended locations are made for all of your cam shelf locations.
1. Understand the hardware: Use double cam screws where
cam shelves are installed at the same height on the left
and right side of a vertical panel. Use single cam screws
everywhere else. Do not use single cam screws back-to-
back.
2. Installtopcamshelvesrst:Some designs include
connector shelves. Install double cam screws for these.
3. Install cam screws.
TIPS:
• Use a #2 Phillips bit that is in good condition.
• Turn cam screw in slowly to avoid breakage.
• Do not spin screwdriver tip in screw head.
4. Place cam shelf onto cam screws.
5. Lockcamttings: Use a #2 Phillips screwdriver.
6. Layout remaining cam shelf positions: As you continue
your installation, some cam shelf positions are exactly
determined by the components which will be clearly
explained for each component.
For other cam shelves, recommended locations are shown.
¼ - ½ clockwise turn
only. Do not force.
IMPORTANT: Hard-to-close
gaps between cam shelves
and vertical panels indicate
that the rail needs to be
shimmed straighter. Review
rail instructions.
Double cam
screw
Single cam screw
Do not use single
cam screws directly
across from each
other.
Install cam screw.
Place cam shelf.
