Instructions / Assembly
13
Cam shelves at the top of a stack of drawers are easy to position and install. It just requires a little math and counting.
1. Install the bottom cam shelf according to your design.
a. Wall-mounted system with drawer sections: Position the bottom cam shelf in the bottom-most vertical
panel holes.
b. Floor-based system with drawer sections and a toe kick:
Position the bottom cam shelf in the 3rd holes up from the bottom
of the vertical panel.
2. Use the worksheet here to determine the position of the cam shelf at the top of a stack of drawers.
3. Refer to drawer instructions to complete your drawer sections.
CAM SHELF WORKSHEET
EXAMPLE
CALCULATION
YOUR
CALCULATION
1.
Multiply the number of 5" drawers by 4 and enter
the value. (Example: For zero - 5" drawers, enter
0x4 = 0
0
2.
Multiply the number of 8" drawers by 6 and enter
the value. (Example: For three 8" drawers, enter
3x6 = 18
18
3.
Multiply the number of 12" drawers by 9 and
enter the value. (Example: For one 12" drawer,
enter 1x9 = 9
9
4.
Add lines 1 thru 3
27
5.
Subtract 1 from line 4
-1
-1
6.
Number of open holes between cam shelf below
26
INSTALL CAM SHELVES IN DRAWER SECTIONS
TOE KICK CAM SHELF
HEIGHT POSITION
Example:
Zero 5" drawers,
three 8" drawers,
one 12" drawer.
26 open holes
between cam
shelves for this
example.
2 ½" 3rd Hole