Instructions / Assembly

18
OPTION 1: SCREW THE COUNTERTOP IN PLACE.
1. Drill
3
⁄16" diameter holes in the top cam shelves
over which the countertop will be placed.
2. Position the countertop
clamps, weights or tape, or have a helper hold it.
3. Drive 1 ¼" screws through the cam shelves from
beneath into the underside of the countertop or
bench top.
CAUTION: Do not drive the screws through the top
surface of the countertop.
OPTION 2: ADHERE THE COUNTERTOP TO THE
TOP CAM SHELVES WITH CAULKING OR ADHESIVE
(WHICH YOU PROVIDE):
IMPORTANT: Follow manufacturer’s instructions on
caulk or adhesive product.
1. Lay squiggly lines or dots of caulking or adhesive
on the top cam shelves around the perimeter and
remaining surface so that no area greater than one
square foot is without some caulking or adhesive.
NOTE: It is not necessary to apply large amounts of
caulking or adhesive.
2. Position the countertop
weights or tape.
IMPORTANT: Check to ensure that the countertop
does not move or slide out of position when
clamping, weighting or taping in place.
3. Remove clamps, weights or tape after the caulk or
adhesive has set.
Countertops for mid-height storage units may be
installed in a variety of ways.
NOTE: The screws will draw the countertop tight to
the cam shelves.
INSTALLING TOPS
IMPORTANT: Do not overload unit. If any shelf, top,
or bottom of unit bows or bends greater than 1/2",
it is overloaded. The shelf, top, or bottom could
collapse and cause serious bodily injury and/or
damage to personal belongings.