Instructions / Assembly

DRAWERS

1. To install drawers, move drawers into position so that the glide

sections on the drawer box are aligned with the glide sections on

the system.

TIP: When installing, you can pull the cabinet glides out to better

align the sections.

2. After positioning the drawers, hold them level, and slide them into

the system.

NOTE: You will experience some resistance when closing the drawers

 

ADJUST DRAWER FRONTS

Oversized drawer box mounting holes allow the drawer front to be

adjusted upwards, downwards, sideways and even rotated.

Loosen the drawer front adjuster screws from inside the drawer box

and adjust the top drawer front so that it is parallel to the top cam

shelf. Once aligned, fully tighten the drawer front adjuster screws.

IMPORTANT: Never use a power drill to tighten drawer front

screws! Always use a manual screwdriver.

For any drawers below the top drawer, adjust the lower drawer fronts

so that the gaps between drawers are uniform across the width of the

fronts—approximately

8".