Instructions / Assembly

TO ATTACH SLANTED SHOE SHELVES:

1. Insert fences into the shelves. Insert the fences

into the pre-drilled holes in the front of the slanted

shoe shelves.

2. Slanted shoe shelf hardware. The back of the

slanted shoe shelf has pre-inserted cams to allow

it to lock to the verticals using single cam bolts.

These single cam bolts will be screwed into the

back holes. The shoe shelf will need to be slanted

upward during installation to allow for tightening

the back cams. The shoe shelf can then be

lowered down, where the front of the shoe shelf

will rest on shelf pins.

SLANTED SHOE SHELVES

3. Install bottom shoe shelf. For the lowest slanted

shoe shelf, install with the front shelf pins in the 2nd

hole from the bottom and the back in the 5th hole

from the bottom.

4. Install remaining slanted shoe shelves. Install the

slanted shoe shelves with the spacing shown below.

2 open holes

above level.

Fence & slanted cam shelf

5 open holes between shelves

Level

Single Cam

Screw

Shelf