Instructions / Assembly

28
BELT AND TIE RACKS
1. Extend the Belt/Tie Rack glide. Hold rack at desired height and align the 5th hole from the end of the glide in the
back of the vertical panel. Attach using Euro screw.
2. Level the Belt/Tie Rack. 
Hole in vertical panel is not pre-drilled.
TIP: The Belt/Tie Rack can also be mounted to a wall or door using a different screw.
VALET ROD

1. Mount Valet Rod to vertical panel with four Euro screws.
2. Extend Valet Rod.
1
1
2
2
Belt Rack
Front
Belt Rack
Glide
Euro Screw
#6 x ½"
Flat Head Screw
Tie Rack
Back
ACCESSORIES