Instructions / Assembly

29
PULL-OUT MIRROR
1. Determine the side of the vertical panel to which
you wish to mount the mirror, and ensure that side
has 6.5" of clearance from obstruction to allow for
installation and proper use.
2. Pull glides back so that the front of the glide is
within the black sliding plate.
3. Pivot the sliding plate so that the glides are now
perpendicular to the mirror.
4. Pull the glides out until they snap into the fully
locked position. You should see two open holes
through the black sliding plate.
5. Determine the required top glide height based on
the reference chart.
6. Hold mirror up to the vertical panel and align the

with the front holes in the vertical panel. Use a Euro
screw to attach the glide and mounting plate to the
vertical panel.
7. Attach the back of glide with a euro screw through

8. Repeat steps 6 & 7 with the bottom glide.
VERTICAL
ACCESSORIES
Customer
Height
Top Glide
Height
6' 2" 58"
6' 0" 56"
5' 10" 54"
5' 8" 52"
6.5"
Black Sliding Plate
Two open holes
visible through
black sliding plate.

top glide and mounting
plate with the front holes
in the vertical panel.
Glide
Front
Back Back
Glide
Back of Mirror
6.5"
1"
1
4
5
6 7
2 3