Installation Guide

ManualsBrandsSimpson Strong-Tie ManualsBuilders HardwareFBFZ 2x4 Z-MAX Galvanized Flat Rail Fence Bracket

FBFZ

U.S. Patent Pending

SIMPSON Strong-Tie

FBFZ

U. S . PAT.

PEND.

¾"

19⁄16"

7⁄32

New design installs easier for

a more concealed connection

The new patent-pending FBFZ ﬂat fence bracket makes the

connection between rails and posts simple and strong. Its sleek

design offers a more concealed look. The FBFZ eliminates the need

for toenailing or screwing. The ﬂat-plate design is a new addition

to the fence bracket line and is specially designed to both ease

installation and show less metal.

New, bendable tabs on each end of the bracket allow for slight

adjustment when wood rails are cut too short and provide a secure

connection when wood expands and contracts.

In addition to fence-rail connections, the FBFZ can also be used for

handrail assemblies for porches and decks that are no more than

30" above ground level. Check with the local building department

for all rail attachment requirements.

Key Features:

• ZMAX galvanized for additional corrosion resistance for external

applications as well as those using preservative-treated wood

• Flexible fastener holes can accommodate multiple types,

including nails and Strong-Drive

SD Connector screws

Material: 18 gauge Finish: ZMAX

coating

Fasteners: #9 x 1½" Strong-Drive SD Connector screws

or 10d x 1 ½" nails

The new FBFZ ﬂat fence bracket offers a lower proﬁle

for fence rail attachments.

Tabs on either end of the new FBFZ bracket can

be slightly bent to adjust for the rail length.

Installation:

1. Position the bracket on the end of the 2x4 rail

2. Install fasteners into all three holes

3. Slide rail into place against post or other wood member

4. Install one fastener through both the top and bottom holes into the post

Note: When using #9 x 1½" SD Connector screws, cut the rail short by ¼"

to account for the head thickness of the screws on each end.

Fence Bracket

Keeps a Low Proﬁle

New!

Summary of content (2 pages)

PAGE 1
New! Fence Bracket Keeps a Low Profile New design installs easier for a more concealed connection The new patent-pending FBFZ flat fence bracket makes the connection between rails and posts simple and strong. Its sleek design offers a more concealed look. The FBFZ eliminates the need for toenailing or screwing. The flat-plate design is a new addition to the fence bracket line and is specially designed to both ease installation and show less metal.
PAGE 2
Fence Bracket Keeps a Low Profile Simpson Strong-Tie® Fence Rail Brackets The FBFZ is the newest addition to the Simpson Strong-Tie line of fence rail brackets. Other products include: 16-30 3 16-30 FBFZ 16- 30 SIMPSON Strong-Tie ® 16- 30 16- 30 U.S. PAT. PEND. 3 FBFZ FB26 FB24Z (FB24R similar) FBR24 FBFZ in a handrail assembly. Check with the local building department for all rail requirements. Fence Rail Brackets Model No. Typical FB26 Fencing Installation Dimensions (in.) Ga.