Product Manual

1.0 Safety Do’s and Don’ts
1.5 Machine Warning Tags and Specification Plate
FIG. 1.1 - INTERNATIONAL WARNING SYMBOLS LOCATED ON THE BELT GUARD:
1. Warning Symbol
2. Read Operating manual
3. Wear Eye Protection
4. Do not spray any person or animal
5. Do not spray electrical components
6. Do not touch hot engine
7. Do not touch belt or moving parts during operation
FIG. 1.3- LOCATED ON THE FRAME BELOW THE PUMP:
FIG. 1.2 - LOCATED ON THE THERMOSTATIC RELIEF VALVE:
FIG. 1.4 - MACHINE SPECIFICATION PLATE
Model Model name (i.e., WB4200SP).
Part No. Machine part number assigned by the manufacturer.
PSI/BAR Maximum pressure rating in pounds per square inch and barometric pressure measure-
ments.
Serial No. Each machine is assigned a individual serial number. The first two digits indicate the
year the machine was manufactured.
GPM/LPM Maximum water flow rating in gallons/liters per minute.
V/AMP/Hz Electric models only. Motor rating in Volts, Amps, and Hertz.
Nozzle Size Indicates the proper nozzle orifice size used with the machine (i.e., 304 = No. 4 orifice).
Burner Fuel Hot water machines only. Indicates type of burner fuel required.
Max Inlet Water Temp Maximum allowable water temperature allowed.
RPM RPM that engine is set at by the manufacturer.
PROTECT PUMP FROM FREEZING • To prevent pump damage when machine is exposed to freezing
temperatures, water in system must be removed and replaced with anti-freeze solution.
PROTEJA LA BOMBA DE CONGELARSE • Para prevenir daño a la bomba cuando la máquina esta
expuesta a la temperatura de congelamiento, el agua del sistema debe ser removida y reemplazada
con la soluciòn de anti-congelamiento.
Valve will open after excessive
heat buildup in system.
La vàlvula se abrirà despuès de
acumular alta temperatura en el
sistema.
www.simpsoncleaningsystems.com
page 5
Engine Fuel Indicates type of engine fuel required.