Instruction manual

STND menu Chapter 4-1

4.1 STND menu

STND

50kHz (38kHz)

200kHz

Dual frequency

Custom screen 1

Custom screen 2

Low and high frequency echosounder display can be set up sepa-

rately. The low frequency display will show deep water bottom

contours, and the high frequency display will show the mid-water

section with trawl targets or bait fish in a higher resolution.

The Dual frequency display will provide both the 50kHz and the

200kHz echo displays in one screen.

The two custom screens will present multiple window combinations

(section 4.2), where one of the main echo displays i.e. 50kHz or

200kHz will be fixed in the left half of the screen. Adjustments can

be made individually to both displays (section 4.7).

To access one of the displays via the menu e.g.:

Call up the menu bar, and...

1,2

press [1] and [2] to call up the standard echo display for 200kHz in

full screen - see display example on next page.

4.2 Shortcut to the pages in the STND echo-series

The STND function is one of the main functions in the EQXX. Each

page under the [STND] key will include a window representing the

standard echo function. It is not possible to exchange main function

displays with a new display. Refer to section 2.1, 2.1.1 and 2.1.2 for

further information on the display and page system.