Instruction manual

Engine monitoring Chapter 9-1
9. Engine menu
5
ENG
1
Engine status - see section 9.1
2
Fuel and transmission - see section 9.2
3
Battery status - see section 9.3
4
2nd Engine status - see section 9.4
5
2nd Fuel and transmission - see section 9.4
6
2nd Battery status - see section 9.4
This graphical engine monitoring system is available for engines
outputting data via NMEA2000
®
or an appropriate interface device
supporting NMEA2000
®
. Depending on the engine system and
interface, some data may not be transmitted on the databus. If not
readily available, please contact the engine manufacturer or your
local Simrad dealer.
The menu points 4, 5 and 6 are a second set of displays, which only
will be visible if the system detected more than two engines on board.
The EQ44-2/EQ54-2 is capable of receiving and presenting various
engine data in either full screen or split screen with two or all three
data displays on same screen: