Instruction manual

Chapter 11-2 SETUP menu

Echosounder setup:

Select transducers:

TYPE PORT

Transducer 1: NONE ECHO1

Transducer 2: NONE ECHO2

BEAM ANGLE DEPTH

Keel depth below surface: 00.0 m

Display: DEPTH BELOW KEEL

Data on NMEA-out from: NONE

Alarm for fish: Strength: 065% OFF

Depth DS fish: min: 0005 m max: 0030 m

Depth DK alarm min.: 0005.0 m OFF

Depth DK alarm max.: 0030.0 m OFF

Water profile: SALT

Velocity of sound in water: 1470m/s

Time/distance scale: ON

Restart of AUTO pulse/power: 20 sec.

Echo sampling: BOTTOM

Demo mode: OFF

Exit Accept

ENT

Use the cursor key to move cursor around in the display

+/-

Select new values by means of the +/- keys

ENT

Confirm changes, or...

Abandon changes and exit display

Transducer - select transducer type. Insert the depth (position) of

the transducer below surface.

Display can show: DEPTH BELOW KEEL / SURFACE / TRANS-

DUCER.

Data on NMEA-out from - select the frequency you wish to use for

transfer of data to connected navigator, plotter, etc.

Alarm for fish - set the strength from min. 000 (weak echo) to max.

099% (strong echo), and you can set it ON or OFF.