Instruction manual

Chapter 11-16 SETUP menu

Alphanumeric names:

First select the key with the desired letter, then you can either repeat

the keystrokes, which will toggle between e.g. A,B,C,1, or once you

have selected one letter you can go back and forth in the alphabet by

means of the +/- keys. Use the cursor key to go to next space or to go

back one space if you make a mistake.

Depending on the selected language, the 0 (zero) key will hold spe-

cial characters e.g. Æ Ø Å Ä Ö Ü Ñ, and the 9 (nine) key will hold:

(empty space) . -

Press the [CLR] key to delete everything from cursor position and to

the right of cursor in that row.

11.6 Factory settings

DELETE MEMORY: It will be possible to erase all sounder set-

tings or SimNet/NMEA settings entered into the unit by the user,

and return to the default settings set up from the factory.

FACTORY PRESETS: If the unit is still ‘alive’ but has ceased to

respond to normal operation, it could become necessary to return to

the factory presets - but first check ‘Troubleshooting’ in section 12.9.

Call up the menu bar, and...

8,5

activate the display for Factory settings

FACTORY PRESETS:

Return to SimNet/NMEA presets

Return to SOUNDER presets

CLR

Return to all factory presets

Show test display

Exit

To activate any of the functions, please follow the instructions in

the display. However, any attempt to make any type of change, will

first of all generate a WARNING display to inform you that you are

about to erase some or all data/settings.

ENT

If you are absolutely sure, press [ENT] to complete the job, or...