Instruction manual
Table Of Contents
- SIMRAD AP35 AUTOPILOT
- DOCUMENT HISTORY
- 1 GENERAL INFORMATION
- 2 OPERATION OF THE AUTOPILOT
- 2.1 Overview
- 2.2 ON/OFF - Standby mode
- Follow-Up steering
- 2.4 Non-Follow-Up steering
- 2.5 NFU Steering lever
- 2.6 NFU Push button remote control
- 2.7 R3000X Remote Control
- 2.8 S35 NFU Steering Lever
- 2.9 Automatic Steering
- 2.10 Automatic Speed selection
- 2.11 Manual speed selection
- 2.12 Navigating with the AP35
- 2.13 WORK-mode
- 2.14 TURN-mode
- 2.15 Dodging
- 2.16 Multiple station system
- 2.17 Lock function
- 2.18 User Set-up Menu
- 3 TECHNICAL SPECIFICATIONS
- 3.1 AP35 Autopilot System
- 3.2 AP35 Control Unit
- 3.3 Junction units
- 3.4 RFC35 Fluxgate compass
- 3.5 RC25 Rate Compass
- 3.6 CDI35 Course Detector Interface
- 3.7 RI35 Mk2 Rudder Angle Indicator
- 3.8 RF300 Rudder Feedback Unit
- 3.9 RF45X Rudder Feedback Unit
- 3.10 R3000X Remote
- 3.11 GI51 Gyro Interface
- 3.12 NI300X NMEA Interface
- 3.13 S35 NFU Steering Lever
- 3.14 FU50 Steering Lever
- 3.15 IP protection
- 4 INSTALLATION
- 4.1 General
- 4.2 Installation checklist
- 4.3 Unpacking and handling
- 4.4 Determine system configuration
- 4.5 AP35 System Layout
- 4.6 RF300 Rudder feedback
- 4.7 RF45X Rudder Feedback Unit
- 4.8 Junction unit
- 4.9 Drive unit
- 4.10 Control unit
- 4.11 RFC35 Fluxgate Compass
- 4.12 RC25 Rate Compass
- 4.13 R3000X Remote Control
- 4.14 FU50 Steering Lever
- 4.15 S35 NFU Steering Lever
- 4.16 F1/2 Remote Control
- 4.17 RI35 Mk2 Rudder Angle Indicator
- 4.18 Interfacing
- 4.19 Single NMEA input/output
- 4.20 Double NMEA input/output
- 4.21 Additional NMEA output on Port 2
- 4.22 Input from “NMEA Compass”
- 4.23 Radar Clock/Data
- 4.24 IS15 Instrument
- 4.25 Analog Repeater
- 4.26 Digital Repeater
- 4.27 External Alarm
- 4.28 NI300X NMEA Interface Unit
- 4.29 CI300X Compass Interface
- 4.30 GI51 Gyro Interface
- 4.31 CD100A Course Detector
- 4.32 CDI35 Interface
- 4.33 Software Setup Procedure
- 4.34 Sea Trial
- 4.35 Final sea trial
- 4.36 Providing user training
- 5 MAINTENANCE
- 6 TROUBLE SHOOTING
- 7 SPARE PARTS LIST
Simrad AP35 Autopilot
28 22083083K
3.2 AP35 Control Unit
Dimensions:....................................See Figure 3-1
Weight:...........................................0,9 kg (2.0 lbs)
Display:
Type:.......................................Backlit LCD matrix display
Resolution:..............................80 x 32 pixels
Color:..............................................Black
Illumination:...................................Adjustable in 10 steps
Environmental Protection:..............IP56
Safe distance to compass:...............0.5 m (1,6 ft)
Temperature:
Operating: ...............................0 to +55 °C (+32 to +130 °F)
Storage:...................................–30 to +80 °C (–22 to +176 °F)
Figure 3-1 AP35 Control Unit - dimensions
Drw. no. N3-208305
3.3 Junction units
Dimensions:....................................See Figure 3-2 and Figure 3-3
Weight:
J300X/J3000X ........................1,3 kg (2,9 lbs.)
J300X-40 ................................2,8 kg (6,2 lbs)
Supply voltage:
J3000X....................................10-28V DC
J300X/J300X-40.....................10-40V DC
Reverse voltage protection .............Yes (not J300X-40)
Power consumption:.......................5 Watt (electronics)
Clutch/bypass load: ........................Max 1,5 Amps
Motor / solenoid drive:
J3000X....................................6 A continuous, 12 A for 5 seconds
J300X......................................10 A continuous, 20 A for 5 seconds
J300X-40 ................................20 A continuous, 40 A for 5 seconds
Heading Sensor input: ....................Composite pulse width modulated