User's Manual

8000i
12" Display processor or Black box processor
RI11
NETWORK port
Adapter cable
000-0127-56 2
m (6 ft)
Ethernet cable
AA010079
0.6 m (2 ft)
8 port Ethernet linker
(or cross-over cable)
AA010009 (AA010084)
8000i
NETWORK port
Connects to 8000i system via Ethernet. Connect 8000i Ethernet cable in between 8 port linker (or cross-
over cable) and supplied adapter cable. Use only 8000i/GB40 Ethernet cables. (Order separately)
Max Ethernet cable length from RI11 box to switch/display is 50 m.
8000i NMEA 0183 Heading
12" Display processor, Black box processor, or Simrad GB40 not
using a SimNet heading sensor
NMEA 0183 Heading
Sensor
Junction Box RI11
COMMS port
8000i NavComputer
Utility port
For MARPA functionality, heading information at 10 Hz needs to be sent to both the RI11 and the master
NavComputer. Use the 12 pin cable AA010070 cable from both units to a junction box to share the same
heading source. (1x AA010070 ships with 8000i/GB40. Order separately for BR24)
8000i SimNet / NMEA2000 Heading
12" Display processor, Black box processor connecting to a SimNet or
NMEA2000 heading sensor
Heading sensor
FC40 or RC42
AT10HD
24006694
RI11
COMMS
AT10
24005936
Junction box 8000i NavComputer
Utility port
For MARPA functionality, heading information at 10 Hz needs to be sent to both the RI11 and the master
NavComputer. AT10HD (optional) connects to RI11 providing fast heading from SimNet or NMEA 2000
backbone. AT10 (optional) connects to the 12 pin Utility cable (AA010070) of the 8000i.
2BWiring the radar system | 19