GO7 Getting Started ENGLISH simrad-yachting.
| GO7 Getting Started 3
| GO7 Getting Started
Contents 7 Introduction 7 8 9 9 The Home page Application pages Integration of 3rd party devices GoFree wireless 11 Basic operation 11 11 12 12 13 13 15 System Controls dialog Turning the system on and off Selecting pages and panels Adjusting panel size Adding new favorite pages Using the cursor on the panel Creating a Man Overboard waypoint 16 Charts 16 17 17 17 18 18 19 The Chart panel Showing dual chart types Panning the chart Positioning the vessel on the chart panel Displaying information about
25 26 27 Switching from automatic mode to manual steering Autopilot indication on the pages The Autopilot panel 28 Echosounder 28 28 29 The Echosounder image Viewing Echosounder history Recording log data 30 DownScan 30 The DownScan image 31 AIS 31 32 AIS target symbols AIS SART 33 Instrument panels 33 33 Dashboards Customizing the Instruments panel 34 Audio 34 34 35 Enabling audio The Audio panel Operating the audio system 36 Alarms 36 36 Alarm system Alarms dialog 37 Tools 37 37 37 37 37
1 Introduction The Home page The Home page is accessed from any operation by selecting the Home button in the upper left corner of a panel. 1 Tools Select a button to access dialogs used for carrying out a task, or for browsing stored information. 2 Applications Select a button to display the application as a full page panel. Press and hold a button to display pre-configured split page options for the application. 3 Close button Select to exit the Home page and return to the previous active page.
5 Man Over Board (MOB) button Select to save a Man Over Board (MOB) waypoint at the current vessel position. Application pages Each application connected to the system is presented on panels. The application can be presented as a full page, or in combination with other panels in a multiple panel page. All application pages are accessed from the Home page. 8 1 Application panel 2 Instrument bar Navigation and sensor information. The bar can be turned off and it can be configured by the user.
7 Menu Panel specific menu. Display the menu by selecting the MENU panel button. Pre-configured split pages Each full screen application has several pre-configured split pages, featuring the selected application combined with each of the other panels. Ú Note: The number of pre-configured split pages cannot be changed, and the pages cannot be customized or deleted. Access a pre-configured split page by pressing and holding the main panel button.
system (tablet only). The system is controlled from the wireless device by Apps downloaded from their relevant Application store. Configuration and setup are described in the GO7 Installation manual. Ú Note: For safety reasons, Autopilot and CZone functions cannot be controlled from a wireless device. Operating the system with a wireless device When remote control is accepted, the active page is mirrored to the wireless device.
2 Basic operation System Controls dialog The System Controls dialog provides quick access to basic system settings. You display the dialog by making a short press on the Power key. The icons displayed on the dialog can vary. For example, the adjust splits option is only available if you are viewing a split page when you open the System Controls dialog. Activating functions Select the icon of the function you want to set or toggle on or off.
Selecting pages and panels Selecting a page • Select a full page panel by selecting the relevant application button on the Home page • Select a favorite page by selecting the relevant favorite button • Select a predefined split panel by pressing and holding the relevant application icon Select active panel In a multiple panel page, only one panel can be active at a time. The active panel is outlined with a border. You can only access the page menu of an active panel. You activate a panel by tapping it.
Adding new favorite pages 1. Select the New icon in the favorite panel on the Home page to open the page editor dialog 2. Drag and drop page icons to set up a new page 3. Change the panel arrangement (only possible for 2 or 3 panels), if required. 4. Save the page layout The system displays the new favorite page, and the new page is included in the list of favorite pages on the Home page. Using the cursor on the panel The cursor can be used to measure a distance, to mark a position, and to select items.
GoTo cursor You can navigate to a selected position on the image by positioning the cursor on the panel, then using the Goto Cursor option in the menu. The Cursor assist function The cursor assist function allows for fine tuning and precision placement of the cursor without covering details with your finger. Press and hold your finger on the screen to switch the cursor symbol to a selection circle, appearing above your finger.
Ú Note: The bearing is always measured from the grey icon to the blue icon. You can also start the measuring function without an active cursor. Both measuring icons are then initially located at the vessel position. The grey icon follows the vessel as the vessel moves, while the blue icon remains at the position given when you activated the function. You terminate the measuring function by selecting the Finish measuring menu option.
3 Charts The chart function displays your vessel’s position relative to land and other chart objects. On the chart panel you can plan and navigate routes, place waypoints, and display AIS targets. The Chart panel 1 Waypoint* 2 Vessel with extension line (extension line is optional) 3 Route* 4 North indicator 5 Grid lines* 6 Range rings* 7 Track* 8 Chart range scale 9 Range rings interval (only displayed when Range rings are turned on) * Optional chart items.
Showing dual chart types If you have different chart types available - embedded or in the card slot - you can show two different chart types simultaneously on a page with two chart panels. You can select a dual chart panel by pressing and holding the Chart application button on the Home page, or by creating a favorite page with two chart panels. Panning the chart You can move the chart in any direction by dragging your finger on the screen.
Course up Rotates the chart in the direction of the next waypoint when navigating a route or navigating to a waypoint. If not navigating the heading up orientation is used until navigation is started. Look ahead Moves the vessel icon closer to the bottom of the screen so that you can maximize your view ahead. Displaying information about chart items When you select a chart item, a waypoint, a route, or a target, basic information for the selected item is displayed.
Ú Note: You must have a SIRIUS data package subscription to search for fueling stations and an AIS receiver connected to search for vessels. 3D charts The 3D option provides a three dimensional graphical view of land and sea contours. Ú Note: All chart types work in 3D mode, but without 3D cartography for the appropriate area the chart appears flat. When 3D chart option is selected, the Pan and the Rotate icons appear on the right side of the chart panel.
4 Waypoints, Routes, and Tracks Waypoints A waypoint is a user generated mark positioned on a chart, or on the Echosounder image. Each waypoint has an exact position with latitude and longitude coordinates. A waypoint positioned on the Echosounder image has a depth value, in addition to position information. A waypoint is used to mark a position you later may want to return to. Two or more waypoints can also be combined to create a route.
Edit a waypoint You can edit all information about a waypoint from the Edit Waypoint dialog. This dialog is activated by selecting the waypoint's pop-up, or from the menu when the waypoint is activated. The dialog can also be accessed from the Waypoints tool on the Home page. Routes A route consists of a series of routepoints entered in the order that you want to navigate them. When you select a route on the chart panel it turns green, and the route name is displayed.
Edit a route from the chart panel 1. Select the route to make it active. 2. Select the route edit option in the menu. 3. Position the new routepoint on the chart panel: - If you set the new routepoint on a leg, a new point is added between existing routepoints. - If you set the new routepoint outside the route, the new routepoint is added after the last point in the route. 4. Drag a routepoint to move it to a new position. 5. Save the route by selecting the save option in the menu.
5 Navigating The navigation function included in the system allows you to navigate to the cursor position, to a waypoint, or along a predefined route. If autopilot functionality is included in your system, the autopilot can be set to automatically navigate the vessel. For information about positioning waypoints and creating routes, refer to "Waypoints, Routes, and Tracks" on page 20. Navigation panels The Nav panels can be used to display information when you are navigating.
4 Bearing to next routepoint 5 Bearing line with allowed off course limit When travelling on a route the bearing line shows the intended course from one waypoint towards the next. When navigating towards a waypoint (cursor position, MOB or an entered lat/lon position), the bearing line shows the intended course from the point at which navigation was started towards the waypoint. 6 Vessel symbol Indicates distance and bearing relative to the intended course.
6 Autopilot If an AC12N, AC42N or SG05 autopilot computer is connected to the system, autopilot functionality is available in the system. An Autopilot is designed to maintain an accurate course in various sea conditions with minimal helm movements. Safe operation with the autopilot Warning: An autopilot is a useful navigational aid, but DOES NOT replace a human navigator.
Autopilot indication on the pages 1 Autopilot indication in Status bar 2 Autopilot pop-up 3 Autopilot tile in Instrument bar Autopilot mode indication in the Status bar The Status bar shows autopilot information as long as an autopilot computer is connected to the network. Icons are included if the autopilot is passive or locked by another autopilot control unit. Autopilot pop up You control the autopilot from the autopilot pop-up.
Autopilot controller Mode selection Turn pattern selection Autopilot tile in Instrument bar You can select to show the autopilot tile in the Instrument bar. If the autopilot pop-up is turned off you can turn it on by selecting the tile in the Instrument bar. The Autopilot panel The autopilot panel is used to display navigation data. It can be shown as a full screen panel, or in a multi-panel page. The number of data fields included in the autopilot panel is dependent on available panel size.
7 Echosounder The Echosounder function provides a view of the water and bottom beneath your vessel, allowing you to detect fish and examine the structure of the sea floor. The Echosounder image 1 Depth 2 Temperature 3 Frequency and Zoom scale 4 Bottom 5 Zoom buttons 6 Depth Range scale 7 Instrument panel 8 Zoom column 9 Fish arches Viewing Echosounder history You can view echosounder history by panning the image. To resume normal scrolling, select the Clear cursor menu option.
Recording log data You can record data and save the file internally in the unit, or save it onto a card inserted into the unit's card reader. Select the Log sonar menu option, and then Record in the Record Echo dialog. When the Echosounder data is being recorded, there is a flashing red symbol in the top left corner and a message appears periodically at the bottom of the screen.
8 DownScan DownScan provides detailed images of structure directly below your boat, down to 92 m (300 ft). The DownScan page is accessed from the Home page when the DownScan transducer is connected.
9 AIS If an NAIS400, an AI50 or an NMEA 2000 VHF that can do AIS (Automatic Identification System) is connected to the network, then any targets detected by these devices can be displayed and tracked. You can also see messages and position for DSC transmitting devices within range. AIS targets can be displayed as overlay on chart images, making this feature an important tool for safe travelling and collision avoidance.
Symbol Description Lost AIS target. When no signals have been received within a time limit, a target is defined as lost. The target symbol represents the last valid position of the target before the reception of data was lost. Selected AIS target, activated by selecting a target symbol. The target returns to the default target symbol when the cursor is removed from the symbol. AIS SART When an AIS SART (Search and Rescue beacon) is activated, it starts transmitting its position and identification data.
10 Instrument panels The Instruments panels consist of multiple gauges - analog, digital and bar - that can be customized to display selected data. The Instruments panel displays data on dashboards, and you can define up to ten dashboards within the Instruments panel. Ú Note: To include fuel/engine information, engine and tank information has to be configured from the Settings panel. Dashboards A set of dashboard styles are predefined to display vessel, navigation, and angler information.
11 Audio If a SonicHub server or a FUSION marine entertainment system is connected to the NMEA 2000 network, you can use the GO7 to control and customize the audio system on your vessel. Before you can start using your audio equipment, it must be installed according to the GO7 Installation manual and to the documentation included with the audio device. Enabling audio A compatible audio device connected to the NMEA 2000 network should automatically be identified by the system.
1 Audio source 2 Audio control buttons 3 Audio tile 4 Audio tools Operating the audio system 1. Select the Audio tile in the Instrument bar to activate the Audio overlay. 2. Select the options icon and then select the audio server. 3. Select the source icon and then select the audio source. - Number of sources depends on the active audio server. 4. Use the panel buttons to control your audio system. For available options, refer to the documentation following your audio equipment.
12 Alarms Alarm system The system continuously checks for dangerous situations and system faults while the system is running. When an alarm situation occurs, an alarm message pops up on the screen. If you have enabled the siren, the alarm message is followed by an audible alarm, and the switch for external alarm becomes active. The alarm is recorded in the alarm listing so that you can see the details and take the appropriate corrective action.
13 Tools By default, the Tools panel includes icons used for accessing options and tools that are not specific to any panel. When external equipment is integrated to the GO7, new icons might be added to the Tools panel. These icons are used for accessing the external equipment's features. Waypoints/routes/tracks List of waypoints, routes, and tracks with details. Select the waypoint, route, or track you wish to edit or delete. Tides Displays tide information for the tide station nearest to your vessel.
Message listing List of all messages received from other AIS vessels with time stamp. Sun, Moon Displays sunrise, sunset, moonrise and moonset for a position based on entered date and the position’s latitude/longitude. Trip calculator Trip 1 / Trip 2 Displays voyage and engine information, with reset option for all data fields. Today Displays voyage and engine information for current date. All data fields are automatically reset when the date changes.
0980 *988-10865-001*