Quick Start Guide

Note: The bearing is always measured from the grey icon

to the blue icon.

You can also start the measuring function without an active cursor.

Both measuring icons are then initially located at the vessel position.

The grey icon follows the vessel as the vessel moves, while the blue

icon remains at the position given when you activated the function.

You terminate the measuring function by selecting the Finish

measuring menu option.

Creating a Man Overboard waypoint

If an emergency situation should occur, you can position a Man

Overboard (MOB) waypoint at the vessel’s current position by

selecting the MOB button on the Home page.

When you activate the MOB function the following actions are

automatically performed:

• a MOB waypoint is positioned at the vessel’s position

• the display switches to a zoomed chart panel, centered on the

vessel's position

• the system displays navigation information back to the MOB

waypoint

Multiple MOB waypoints are saved by repeatedly pressing the MOB

buttons. The vessel continues to show navigation information to

the initial MOB waypoint. Navigation to subsequent MOB waypoints

needs to be done manually.

Cancel navigation to MOB

The system continues to display navigational information towards

the MOB waypoint until you cancel the navigation from the menu.

Delete a MOB waypoint

1. Select the MOB waypoint to activate it

2. Select the MOB waypoint's pop-up to display the MOB waypoint

dialog

3. Select the delete option in the dialog.

A MOB waypoint can also be deleted from the menu when it is

activated.

Basic operation | GO7 Getting Started