Installation manual

HD Digital Radar 2kW / 4kW
/ 6kW / 10kW / 25kW
Simrad HD Digital Radar Systems use both Radomes and Open Array
antennae, working with power levels from 2kW to 25kW via high capac-
ity Ethernet. They ensure exceptional detection of small or distant targets
using advanced Digital Signal Processing (DSP). Screen-clutter in any
weather is virtually eliminated to display the full picture of your surround-
ings allowing a clear, accurate and easy-to-interpret image, using 10-bit
digital radar video sampling and Sensitivity Time Control (STC). Adding a
high speed heading input from an autopilot system or dedicated sensor al-
lows the radar image and MARPA-targets to be accurately overlaid on the
chart. Enhanced rotational mode enables you to interpret targets instantly.
Simrad Professional’s HD Digital radars automatically adjust colour gradi-
ents on longer ranges for better interpretation of targets. This is especially
useful when looking into storm areas and weather fronts.
Automatic Harbour and Offshore modes provide optimised radar imaging
for hands-off operation. The radar provides bearing and distance, speed
and course, closest point of approach and time on selected targets. Easy to
use Guard Zone areas can be shaped and defined by the user, to maintain
a radar watch in specific zones. Qualified radar targets that enter the active
zone will trigger an alert on the radar system.
H D D I G I TA L R A D A R S K E Y F E AT U R E S
High Performance Scanners
Networked Radar System
Digital Signal Processing Technology
Radar/Chart Overlay
FIVE Scanner Options From: 2 kW/18” to 25 kW/7’
Automatic Tune, Gain and Sea Clutter Adjustments
Resolution 1280 x 1024 pixels
Wide dynamic range receiver for improved sea clutter
Modern remote keypad controller
Digital, Analog, and multimedia inputs
VGA output connector for second monitor
Nav lines and trails with parallel index lines
Optional tracking up to 50 AIS targets
Optional Target Tracking (ATA) up to 10 user
Selected targets - up to 5 automatic
Optional Gyro Log interface
Part Number Description
AA010028SIM 25 kW Radar scanner, 7 ft
AA010016 Navico 25kW radar processor
AA010027SIM 10 kW Radar scanner, 6 ft
AA010015 Navico 10kW radar processor
AA010026SIM 6 kW Radar scanner with 4 ft antenna and 20 m
(66ft) cable
AA010014 Navico 6kW radar processor
AA010025SIM 4kW radome, 24 In, with 15 m (49 ft) cable
AA010013 Navico 4kW radar processor
AA010024SIM 2kW radome, 18 In, with 15 m (49 ft) cable
AA010012 Navico 2kW radar processor
Simrad 4kW Dome
72
18
mi
Simrad 6kW Array
Targets can be interpreted instantly through chart
information – such as navigation aids and coastlines. Heading
allows Mini-ARPA operation on NSE with tracking capacity up
to 10 different User-defined targets.
Different colour palettes are provided to suit the user’s taste
as well as to improve viewing in different lighting conditions.
13
Professional Series Navigation Systems