Installation manual

Technical Specifications
M C 5 0 M A R I N E C O M P U T E R
E C D I S A N D P L E C D I S ™ A N D E C S S Y S T E M S
196 mm
(7.7”)
363 mm (14.3”)
427.5 mm
(16.8”) depth
C O P 1 0 R E M O T E C O N T R O L
144 mm
(5.8”)
72 mm (2.9”)
53 mm (2”)
depth
L C D M O N I TO R S ( 1 9 ” D I S P L A Y )
111.3 mm (4.38”)
86.5 mm (3.40”)
285.0 mm (11.22”)
221.0 mm (8.70”)
212.0 mm (8.35”)
315.5 mm (12.40”)
65 mm (2.55”)
N S E 8
N S E 1 2
WEIV KCAB
WEIV EDIS
WEIV TNORF
BOTTOM VIEW
TOP VIEW
DIMETRIC VIEW
PANEL CUTOUT
Units: mm [inches]
H
1 2
G
F
E
3
4
5
6
D
C
B
A
1 2
3
4
5
6
7
8
7
8
G
F
E
9 10
D
C
B
11 12
A
9 10
11 12
H
29-08-2008
7251
Hatteland Display AS
Åmsosen
N-5578 Nedre Vats
A001467-1
Date:
Mechanical Designer
Projection:
This document is the property of Hatteland Display AS.
This document and any authorized reproduction thereof, must not be used in
any way against the interest of Hatteland Display AS.
Any authorized reproduction, in whole or in part, must include this legend.
--
1
Revision:
Approved by:
Drawing number:
HATTELAND DISPLAY STANDARD
Material type and Quality:
Surface treatment:
Sheet metal fasteners:
Welding specification
Tolerance:
Aluminium 5052; standard EN 485-2 (1 & 2)
St-37 Alu/Zink; standard EN 10215 (1)
Stainless Steel AISI 316 L; standard EN 4404
(1) TRIKATION (Zinc/Mangan Phosphatizing)
(2) Powder coating RAL 9011 EPOXY STRUCTUR
Du Pont: EP0301-4950327
PSM International or equivalent
(www.psminternational.com)
leddim 1-8672 OSI4-882-NE-SN
Created by:
4701
Date:
23-09-2004
Modified by:
7251
Date:
14-03-2008
Revision
2
Size: A1 Format
1:2
Colour code:
Scale:
Surface treatment:
483 mm (19,02”)
465mm (18,31”)
444mm (17,48”)
267mm (10,51”)
98,75mm (3,89”)
412mm (16,22”)
16mm (0,63”)
434mm (17,09”)
68mm (2,68”)
14mm (0,55”)
438,00 17,24
416,00 16,38
129,00 5,08129,00 5,08
129,00 5,08 129,00 5,08
84,74 3,34
64,26 2,53
64,26 2,53
84,74 3,34
4,01 0,16
6,99 0,28
4,01 0,16
6,99 0,28
13,50 0,53
13,50 0,53 13,50 0,53
13,50 0,53
Metric tread M6 or Ø6,5[0,26]
4 places vertically
Optional holes Ø6,5[0,26]
screwed from the backside of panel
4 places horizontally
SALES DRAWING JH 19T14 MMD
MA1-AABA, Multi Power model shown in this drawing,
but measurements generally apply for all MMD-xxx-Axxx models.
WEIV KCAB
WEIV EDIS
WEIV TNORF
BOTTOM VIEW
TOP VIEW
DIMETRIC VIEW
PANEL CUTOUT
Units: mm [inches]
H
1 2
G
F
E
3
4
5
6
D
C
B
A
1 2
3
4
5
6
7
8
7
8
G
F
E
9 10
D
C
B
11 12
A
9 10
11 12
H
29-08-2008
7251
Hatteland Display AS
Åmsosen
N-5578 Nedre Vats
A001467-1
Date:
Mechanical Designer
Projection:
This document is the property of Hatteland Display AS.
This document and any authorized reproduction thereof, must not be used in
any way against the interest of Hatteland Display AS.
Any authorized reproduction, in whole or in part, must include this legend.
--
1
Revision:
Approved by:
Drawing number:
HATTELAND DISPLAY STANDARD
Material type and Quality:
Surface treatment:
Sheet metal fasteners:
Welding specification
Tolerance:
Aluminium 5052; standard EN 485-2 (1 & 2)
St-37 Alu/Zink; standard EN 10215 (1)
Stainless Steel AISI 316 L; standard EN 4404
(1) TRIKATION (Zinc/Mangan Phosphatizing)
(2) Powder coating RAL 9011 EPOXY STRUCTUR
Du Pont: EP0301-4950327
PSM International or equivalent
(www.psminternational.com)
leddim 1-8672 OSI4-882-NE-SN
Created by:
4701
Date:
23-09-2004
Modified by:
7251
Date:
14-03-2008
Revision
2
Size: A1 Format
1:2
Colour code:
Scale:
Surface treatment:
483 mm (19,02”)
465mm (18,31”)
444mm (17,48”)
267mm (10,51”)
98,75mm (3,89”)
412mm (16,22”)
16mm (0,63”)
434mm (17,09”)
68mm (2,68”)
14mm (0,55”)
438,00 17,24
416,00 16,38
129,00 5,08129,00 5,08
129,00 5,08 129,00 5,08
84,74 3,34
64,26 2,53
64,26 2,53
84,74 3,34
4,01 0,16
6,99 0,28
4,01 0,16
6,99 0,28
13,50 0,53
13,50 0,53 13,50 0,53
13,50 0,53
Metric tread M6 or Ø6,5[0,26]
4 places vertically
Optional holes Ø6,5[0,26]
screwed from the backside of panel
4 places horizontally
SALES DRAWING JH 19T14 MMD
MA1-AABA, Multi Power model shown in this drawing,
but measurements generally apply for all MMD-xxx-Axxx models.
WEIV KCAB
WEIV EDIS
WEIV TNORF
BOTTOM VIEW
TOP VIEW
DIMETRIC VIEW
PANEL CUTOUT
Units: mm [inches]
H
1 2
G
F
E
3
4
5
6
D
C
B
A
1 2
3
4
5
6
7
8
7
8
G
F
E
9 10
D
C
B
11 12
A
9 10
11 12
H
29-08-2008
7251
Hatteland Display AS
Åmsosen
N-5578 Nedre Vats
A001467-1
Date:
Mechanical Designer
Projection:
This document is the property of Hatteland Display AS.
This document and any authorized reproduction thereof, must not be used in
any way against the interest of Hatteland Display AS.
Any authorized reproduction, in whole or in part, must include this legend.
--
1
Revision:
Approved by:
Drawing number:
HATTELAND DISPLAY STANDARD
Material type and Quality:
Surface treatment:
Sheet metal fasteners:
Welding specification
Tolerance:
Aluminium 5052; standard EN 485-2 (1 & 2)
St-37 Alu/Zink; standard EN 10215 (1)
Stainless Steel AISI 316 L; standard EN 4404
(1) TRIKATION (Zinc/Mangan Phosphatizing)
(2) Powder coating RAL 9011 EPOXY STRUCTUR
Du Pont: EP0301-4950327
PSM International or equivalent
(www.psminternational.com)
leddim 1-8672 OSI4-882-NE-SN
Created by:
4701
Date:
23-09-2004
Modified by:
7251
Date:
14-03-2008
Revision
2
Size: A1 Format
1:2
Colour code:
Scale:
Surface treatment:
483 mm (19,02”)
465mm (18,31”)
444mm (17,48”)
267mm (10,51”)
98,75mm (3,89”)
412mm (16,22”)
16mm (0,63”)
434mm (17,09”)
68mm (2,68”)
14mm (0,55”)
438,00 17,24
416,00 16,38
129,00 5,08129,00 5,08
129,00 5,08 129,00 5,08
84,74 3,34
64,26 2,53
64,26 2,53
84,74 3,34
4,01 0,16
6,99 0,28
4,01 0,16
6,99 0,28
13,50 0,53
13,50 0,53 13,50 0,53
13,50 0,53
Metric tread M6 or Ø6,5[0,26]
4 places vertically
Optional holes Ø6,5[0,26]
screwed from the backside of panel
4 places horizontally
SALES DRAWING JH 19T14 MMD
MA1-AABA, Multi Power model shown in this drawing,
but measurements generally apply for all MMD-xxx-Axxx models.
The images of the LCD display are the property of Hatteland Display AS. These images and any
authorized reproduction thereof, must not be used in any way against the interest of Hatteland Display AS.
Any authorized reproduction, in whole or in part, must include this legend.
WEIV KCAB
WEIV EDIS
WEIV TNORF
BOTTOM VIEW
TOP VIEW
DIMETRIC VIEW
PANEL CUTOUT
Units: mm [inches]
H
1 2
G
F
E
3
4
5
6
D
C
B
A
1 2
3
4
5
6
7
8
7
8
G
F
E
9 10
D
C
B
11 12
A
9 10
11 12
H
29-08-2008
7251
Hatteland Display AS
Åmsosen
N-5578 Nedre Vats
A001467-1
Date:
Mechanical Designer
Projection:
This document is the property of Hatteland Display AS.
This document and any authorized reproduction thereof, must not be used in
any way against the interest of Hatteland Display AS.
Any authorized reproduction, in whole or in part, must include this legend.
--
1
Revision:
Approved by:
Drawing number:
HATTELAND DISPLAY STANDARD
Material type and Quality:
Surface treatment:
Sheet metal fasteners:
Welding specification
Tolerance:
Aluminium 5052; standard EN 485-2 (1 & 2)
St-37 Alu/Zink; standard EN 10215 (1)
Stainless Steel AISI 316 L; standard EN 4404
(1) TRIKATION (Zinc/Mangan Phosphatizing)
(2) Powder coating RAL 9011 EPOXY STRUCTUR
Du Pont: EP0301-4950327
PSM International or equivalent
(www.psminternational.com)
leddim 1-8672 OSI4-882-NE-SN
Created by:
4701
Date:
23-09-2004
Modified by:
7251
Date:
14-03-2008
Revision
2
Size: A1 Format
1:2
Colour code:
Scale:
Surface treatment:
483 mm (19,02”)
465mm (18,31”)
444mm (17,48”)
267mm (10,51”)
98,75mm (3,89”)
412mm (16,22”)
16mm (0,63”)
434mm (17,09”)
68mm (2,68”)
14mm (0,55”)
438,00 17,24
416,00 16,38
129,00 5,08129,00 5,08
129,00 5,08 129,00 5,08
84,74 3,34
64,26 2,53
64,26 2,53
84,74 3,34
4,01 0,16
6,99 0,28
4,01 0,16
6,99 0,28
13,50 0,53
13,50 0,53 13,50 0,53
13,50 0,53
Metric tread M6 or Ø6,5[0,26]
4 places vertically
Optional holes Ø6,5[0,26]
screwed from the backside of panel
4 places horizontally
SALES DRAWING JH 19T14 MMD
MA1-AABA, Multi Power model shown in this drawing,
but measurements generally apply for all MMD-xxx-Axxx models.
21
Professional Series Navigation Systems