Operator manual Simrad ITI Trawl instrumentation system
Simrad ITI Trawl Instrumentation System Base version 850--043814 / AA000
Operator manual Note Simrad AS makes every effort to ensure that the information contained within this document is correct. However, our equipment is continuously being improved and updated, so we cannot assume liability for any errors which may occur. Warning The equipment to which this manual applies must only be used for the purpose for which it was designed. Improper use or maintenance may cause damage to the equipment or injury to personnel.
Cover and Contents Sections 1 System familiarization This section defines and describes the main system units, and presents a brief theory of operation. 2 Operational procedures This section presents the most common procedures to cover the normal day-to-day operations. 3 Screen presentation modes This section describes the various operational modes and the information found on the display. 4 Command references This section describes each command and option in detail.
Simrad ITI Base version Remarks References Further information about the ITI system may be found in the following manual: · ITI Installation Manual, P2257. The reader This operator manual is intended to be used by the system operator. He/she should be experienced in the operation of positioning systems, or should have attended a Simrad training course. Note This manual includes sections that may be revised individually.
Cover and Contents Document revisions Rev Date A Checked by Written by Sign . Date Sign . Approved by Date Sign . B C 02.04.93 NB 02.04.93 KEG 02.04.93 TAL D 16.01.97 CL 16.01.97 EPB 16.01.97 KEG E F G H The original signatures are recorded on the company’s logistic data system.
Simrad ITI Base version Simrad References (The information on this page is intended for Simrad’s internal use) Documents Sect Title Loc. File P.
Simrad ITI Operator manual Simrad ITI Operator manual Simrad ITI Operator manual Simrad ITI Operator manual
