Operation Manual

8 |
Operation | FU80, NF80, QS80 User Guide
Using the FU80
The FU lever can be rotated 70° to port and starboard from mid-
position. The lever will remain in set position, and the commanded
rudder angle/heading change maintained until the lever is returned
to mid-position.
You can use the FU80 in FU, AUTO and NoDrift mode.
You can also get command if the system is in NFU, NAV or Wind
mode, but you cannot operate these modes from the FU80.
Initial mode Lever moved / Resulting mode (action)
Standby No action
NFU No action
FU FU (rudder command)
AUTO AUTO (heading change)
NoDrift NoDrift (course change)
NAV
No action
Wind
¼ Note: The Wind mode is only available if the autopilot system
has been set up for sailboat. See the Installation manual for your
autopilot system.
Mode selection
You toggle between available modes by repeated pressing the
MODE key. The selection times out and triggers a mode shift.
When in any other mode than FU, the first press on the MODE key
will turn the system to FU mode.
You switch to Standby from any mode by pressing the STBY key.
12 |