Operation Manual

| 5
Installation | FU80, NF80, QS80 User Guide
The bulkhead frame
An optional bulkhead frame is available.
For part number, refer to our web sites
(pro.simrad-yachting.com and www.simrad-yachting.com)
1. Attach the mounting template to the selected position
2. Drill fastening holes
3. Drill hole for the cable, or remove the material in the cable entry area
on the frame
4. Peel backing off the gaskets (A) and apply one to the remote, and
the other to the sealing frame (D)
5. Secure the unit with the 4 screws (B)
6. Clip the bezel (C) in place
A
A
C
D
B
The NF80 lever
The lever is not mounted from factory. Screw the lever firmly into
the mounting hole.
The FU80 lever
The factory mounted short lever can be replaced by the longer lever
included in the package.