Installation manual

| 15
Wiring | NSO-II Installation Manual
If the number of ethernet devices exceeds the number of available ports on the NEP-2, it is
possible to link two or more NEP-2 modules together to provide the required ports. The NEP-2
modules are fi tted with 5 ethernet ports.
¼ Note: When designing a system, take in to account the ports ‘lost’ when used for linking
multiple NEP-2 modules together.
Video In
Each NSO-II can be connected to two composite video cameras, and display video images on
its displays. Both NTSC and PAL formats are supported.
¼ Note: The video images will not be shared with another unit via the network. It is only pos-
sible to view video on the unit connected to the video source.
Connecting video sources
1 BNC male plugs
2 Composite video cameras
3 Camera power feed
¼ Note camera cables are not supplied, and will need to be selected to suit termination - BNC
at the NSO-II, and typically BNC or RCA plug at the camera end.
¼ Note camera power is externally supplied, see camera installation instructions for require-
ments.
+ -
+ -
1
2
3
3
NSO-II_IM_EN_988-10392-001.indd 15 9/07/2013 3:53:45 p.m.