Operation Manual

4 |
Contents | NSS Operator Manual
38 Using the NSS in an AP24/AP28 system
38 Using the autopilot in an EVC system
39 The autopilot settings panel
42 Using the radar
42 The radar panel
42 The radar operational modes
42 Using the cursor on the radar panel
43 Optimizing the radar image
43 Positioning the radar center
44 Measuring range and bearing to a target
45 Setting a guard zone around your vessel
45 Radar options
47 MARPA targets
48 Radar overlay
49 Radar settings panel
50 The echosounder
50 Setting up the echosounder panel
51 Zooming
52 Adjusting color and gain settings
52 Using the cursor on the echosounder panel
53 Placing a mark on an echosounder image
53 Measuring distance
53 Pausing the echosounder
53 Recording the echosounder data
54 Echo options
55 StructureScan™ overlay
55 The echosounder settings panel
57 StructureScan™
57 Setting up the StructureScan™ image
58 Zooming
59 Adjusting the color settings
59 Using the cursor on the StructureScan™ panel
59 Placing a mark on a StructureScan™ image
60 Measuring distance
60 Pausing StructureScan™
60 Recording the StructureScan™ data
60 Structure options
61 The Instruments panels
61 The dashboards
61 Customizing the Instrument panel
62 Using AIS
62 Target symbols
62 Viewing information about AIS targets
63 Vessel alarms
63 The vessel settings panel
65 Audio
65 Enabling audio
65 The audio media bar
66 Setting up the SonicHub speakers