Operation Manual

Sensors
119
850-165186 / Rev.B
Sensitivity: The sensitivity of the Catch sensor is determined by
the number of meshes separating the rubber straps. You can
simulate this by stretching the net’s meshes to approximate the
mesh opening estimated to trigger the sensor. Mark the location
(with colored thread) for future references.
Rubber straps: Inspect the rubber straps regularly and always
before a new haul. Replace them if you detect visible signs of
cracks or damage.
Sacrificial water switch sensor
If the water switch on your sensor is a sacrificial brass screw,
this screw must be checked every month. Whenever required
due to wear and tear, the screw must be replaced. Refer to the
Operational procedures in the operator manual.