Operation Manual

Simrad PI54

182

850-165186 / Rev.B

Restart of AUTO pulse/power: If you have set the transmit

power and pulse length parameters to Auto, the echo sounder

will automatically restart the parameters at fixed intervals to

ensure correct settings. By means of this parameter, you can

control the intervals. In most cases, leave this setting to 20

seconds, which is the default value.

Echo sampling: Using this function, you can select if the

automatic ping rate shall be defined by the current depth or the

current range.

Demo mode: This parameter allows you to run the echo sounder

in a “demonstration” mode. When this m ode is enabled, the

echo sounder will automatically use a “demo transducer” to

avoid damage t o the output circuitry.