Operation Manual

References
183
850-165186 / Rev.B
Factory presets
This function allows you to restore the PI54 parameters to the
default settings chosen by Simrad.
MENU Exit
(CD11109F)
Factory presets:
Return to SimNet/NMEA presets
Return to SOUNDER presets
Return to PI FUNCTION presets
Return to all factory presets
Show test display
1
2
3
CLR
0
To acces s the presets, press the Menu key, and select Setup (4).
On the submenu, select Factory settings. Once accessed, you
have the following choices:
(1): Restore the SimNet/NMEA f actory presets. This will only
restore the interface parameters you have selected on the PI54.
Any settings you have made for echo sounder and sensor
operation will not be affected.
(2): Restore the echo sounder factory presets. This will only
affect the parameters related to echo sounder operation.
(3): Restore the PI54 factory presets. This will only affect the
parameters you have made concerning sensor selection and
setup. Sensor setup will not be affected by this reset, but the
Demo mode will be switched off.
(CLR): This will clear AL L current parameters and replace
them with the factory presets.
Caution: If you choose CLR to return to all factory presets, you
will need to redefine every single parameter you have
made on the PI54. This includes all echo sounder
settings, sensor selections and setup, system interfaces
and alarms.
(0): This option will open a test display. This display is only
provided for software debugging and maintenance use, and it
will not give you any useful i nformation. To close the test
display, press the MENU button.
Related topics
→ How to restore default settings, page 101