Operation Manual

Simrad PI54

850-165186 / Rev.B

Battery chargers

All sensors are power by internal batteries, and these need

charging at regular intervals. The Simrad chargers have been

designed to allow the sensors to be stored in charging positions

whenever they are not used, and “overcharging” will not take

place. Either of the two charger types can be used on any of the

sensors, but the PI Charger will only provide fast charging on

the PI Sensors.

PS30 Charger

Three different Simrad PS30 Chargers are

available depending on the vessel’s main power

supply; 230 Vac, 110 Vac and +24 Vdc.

PI Charger

The PI Charger will provide fast charging of the

new PI sensor series. The Simrad PI Charger

requires a +12 to +32 Vdc power supply.