Operation Manual

References
189
850-165186 / Rev.B
PI Function
The Interface setup / PI Function window allows you to
define NMEA 0183 outputs.
The information provided for the two NMEA outputs are
derived from the real time operational parameters in the PI54.
Some of these will require input from other peripheral devices.
All data is transmitted on the $PSIMP sentence format. The
information is only required if you have specific needs. To set
them up correctly, consult a Simrad dealer.
Configuration: The PI54 will export the $PSIMP
Configuration sentence (C) on the chosen NMEA ports.
Data output: The PI54 will export the $PSIMP Data sentence
(D) on the chosen NMEA ports.
Sensor definition: The PI54 will export the $PSIMP Sensor
definition sentence (F ) on the chosen NMEA ports.
Frequency spectrum: The PI54 will export the $P SIMP
Frequency spectrum sentence (S) on the chosen NMEA ports.
Transit: The PI54 will export the $PSIMP Transmit sentence
(T) on the chosen NMEA ports.