Operation Manual

Simrad PI54
190
850-165186 / Rev.B
Position
The Interface setup / Position window allows you to define a
source for position information. It also allows you to set up
export of navigational waypoints.
Group selection: This parameter allows you to connect the
PI54 to a group of SimNet instruments. If such a group is not
present, the parameter is unavailable, and fixed to
STAND-ALONE. This means that you can manually select data
source from third-party units.
Source: The PI54 will automatically read the NMEA inputs to
search for available sources. If no sources are found, the phrase
“(none available)” is given. If one or more sources are found
you may choose between them.
Waypoint location: Using this parameters, you can set up the
PI54 to export navigational waypoints as WPL telegrams on
NMEA1 and/or NMEA2. A waypoint is automatically generated
every time you press the EVENT button.