Operation Manual

Simrad PI54
192
850-165186 / Rev.B
Navigation
The Interface setup / Water window allows you to define
sources for water related information. It also allows you to set
up export of water related information telegrams.
Water depth input: The PI54 is here configured to either
supply its own water depth inf ormation, or to receive that
information from an external source.
Group selection (Water depth input): This parameter allows
you to connect the PI54 to a group of SimNet instruments. If
such a group is not present, the parameter is unavailable, and
fixed to STAND-ALONE. This means that you can manually
select data source from third-party units.
Source (Water depth input): The PI54 will automatically read
the NMEA inputs to search for available water depth sources. If
no sources are found, the phrase “(none available)” is given. If
one or more sources are found you may choose between them.
In the example above, the internal echo sounder is the only
source available.
Water temperature input: The PI54 is here configured to
either supply its own water temperature information, or to
receive that information from an external source.